Engineering Gauges > Feeler & strips Gauge > Feeler Gauge – 13 Blades, 4″ Size [Model-FG-13]
Feeler Gauge – 13 Blades, 4″ Size
SKU: Model-FG-13
MATERIAL: Imported Spring Steel C-60 (55-58 HRC)
RANGE: 0.025 mm to 1.0 mm (0.001" to 0.39")
ACCURACY: As per T2 grade tolerances
FINISH: Fine Polished
RANGE: 0.025 mm to 1.0 mm (0.001" to 0.39")
ACCURACY: As per T2 grade tolerances
FINISH: Fine Polished
USES:
Feeler gauges each Leaf is made in Imported material by Fine Blanking. Each Leaf have Permanent marked Leaf Thickness in Metric & English. This very precise feeler gauge is useful in Automobile to check gap in Cylinder and Piston. Also Useful in Tool room, Die manufacturer and General Engineering as a Shims. In Quality Department as a Master Gauge.
FEATURES :
AVAILABLE MODELS: 1) 27 Blades, 2) 13 Blades, 3) 9 Blades With different Length like 3″, 4″ with & without Taper cutting at Tail, 4) Also Available Strips in 12″ Length.
IMPORTANT :
–
PACKING :
Each Assembly is stacked with External Cover duly marked Model size with Tightening screw in Plastic Pouch.
